Alfa Laval SaniMega, Инструкция по эксплуатации

Страница: 13 / 24

6 Maintenance and Repair
6.2 Turbine and Gear Assembly
Disassembly:
1. Remove Circlip (pos. 11) and remove the Gear wheel (Pos. 4) . Push out Cylindrical Pin (Pos. 3)
2. Remove the Gear assembly from the Drive Shaft (Pos. 9). The Turbine shaft (Pos. 8) is now released and can be removed.
3. Remove Circlip (Pos. 11) and pull out the Pinion (Pos. 1) releasing the Worm wheel (pos. 2) and Washer (Pos. 14).
4. Remove the Circlip (Pos. 11) and the Horizontal shaft (Pos. 12).
Reassembly:
1. Reassembly is carried out in the opposite order.
Before mounting Gear wheel (Pos. 4) make sure that the Horizontal shaft (Pos. 12) and the Worm wheel (Pos. 2) can be
rotated easily without any uneven resistance.
TD523546
13