3 Installation
Study the instructions carefully and pay special attention to the warnings!
NC = Normally closed.
NO = Normally open.
A/A = Air/air activated.
Step 5
Handle/indication:
1. Fit the standard handle on the valve so that the screw can enter
the hole in the disc connection.
2. Fit the handle with position indication as shown and in
accordance with the Step 3-Step 4, section 5.3 Valve assembly.
Pre-use check:
Open and close the valve several times to ensure that it operates
smoothly.
Pay special attention to the warnings!
Standard handle
Handle with position
indication
3.5
Recycling information
• Unpacking
-
Packing material consists of wood, plastics, cardboard boxes and in some cases metal straps
-
Wood and cardboard boxes can be reused, recycled or used for energy recovery
-
Plastics should be recycled or burnt at a licensed waste incineration plant
-
Metal straps should be sent for material recycling
• Maintenance
-
During maintenance oil and wear parts in the machine are replaced
-
All metal parts should be sent for material recycling
-
Worn out or defective electronic parts should be sent to a licensed handler for material recycling
-
Oil and all non metal wear parts must be taken care of in agreement with local regulations
• Scrapping
-
At end of use, the equipment shall be recycled according to relevant, local regulations. Beside the equipment itself, any
hazardous residues from the process liquid must be considered and dealt with in a proper manner. When in doubt, or in the
absence of local regulations, please contact the local Alfa Laval sales company
11
