Page 22
Instruction Manual, Gunclean Toftejorg T-82
Standard machines and machines delivered with ATEX certification
in accordance with Directive 94/9/EC
IM-TE91A052-EN4
Maintenance and repair
Service and Repair of ATEX Approved Machines
In order to ensure compliance with the ATEX regulations for service and repair in accordance with EN
60079-19, all service and repair of ATEX approved machines should be performed by Alfa Laval Tank
Equipment A/S, Ishoej, Denmark.
Warning:
ATEX requirements regarding repair of ATEX approved machines according to EN
60079-19.
A tag with the following labelling information must be attached to the machine:
- Repair symbol R
- Alfa Laval logo and address
- Repair number
- Date of repair
- Machine serial number
The tag must be laminated and attached to the machine-downpipe outside the tank
using a cable tie.
If a customer wishes to carry out service or repair himself, it is the responsibility of the repair shop to
ensure that the ATEX requirements are met in any way possible. After performing service or repair, the
repair shop thus carries the full responsibility for the ATEX approval of the machine.
