Alfa Laval COR, Инструкция по эксплуатации

Страница: 6 / 12

3 Installation
Study the instructions carefully and pay special attention to the warnings!
3.1 Employment
1. The cover shall be installed in accordance with national regulations for safety and other relevant regulations and standards.
2. The item cannot work autonomously, but it is intended for installation through welding on a tank. It is the responsibility of the
contractor to respect the regulations related to the construction of said equipment.
3. On the manway door/manhole cover, loads, solicitations or vibrations of external origin should be avoided.
4. Instructions as to the positioning of the product (horizontally or vertically, above or below the liquid level of the tank) are
included in the product data sheets. Positioning the product in any position other than as shown in the catalogue may
damage the manway and cause leakages. Do not apply any loads to the manhole or cause stress by vibrations. Use only the
components (frame, lid, bolts, arms) provided by Alfa Laval. The Alfa Laval products are individually fitted. The manway
door/manhole cover is delivered complete and assembled by qualified personnel; Always use the manhole together with
the frame provided. Decoupling the frame from the manhole lid could result in improper fit. Its components (frame, cover,
eyebolt, arm) cannot be removed and separately reassembled on other similar items.
5. The manway door/manhole cover is marked on the frame. Do not remove neither alter the marking.
6. The manway door/manhole cover is individually fitted. Always use the manhole together with the frame provided. Decoupling
the frame from the manhole could result in improper fit. Do not disassemble and do not use with any other component.
6