Alfa Laval CM, Инструкция по эксплуатации

Страница: 11 / 21

3 Installation
NOTE
When mounting the CM, it is important to achieve a solid mechanical connection between the equipment
and the CM in addition to any adapter if fitted, ideally mounted to a flat surface. The CM can be mounted on
surfaces up to 80° C (176° F).
3.1 General Guidelines
The general guidelines for custom fitting of the CM to rotating equipment, we recommend the
following.
CM screw Clearance hole Thread Tool Max torque
Button SHCS [Drill Size / Depth] [Tap Size / Depth] Hex key
M6 x 30mm 5mm / 10mm M6 / 7mm 4mm 10 Nm / 7.5 ft-lb
2067-0006
3.2 Alfa Laval equipment guidelines
For Alfa Laval equipment which does not have the specific M6 tapping available for retro-fit, an
adapter kit can be supplied.
Please find the relevant addendum for the specific Alfa Laval equipment.
200002050-2-EN-GB 11
EN