Alfa Laval Blue BC, Инструкция по эксплуатации

Страница: 11 / 32

9460173341-02
11
Alfa Laval is a trademark registered and owned by Alfa Laval Corporate AB.
Alfa Laval reserves the right to change specification without prior notification.
If units designated for vertical airflow have been
ordered with loose feet, the heat exchangers are
packed and shipped in horizontal airflow posi -
tion. Mounting feet must be mounted prior to
installation according to the following procedure.
During this procedure the operator must never
stand nor walk below the suspended load.
1) Lift unit from pallet and tilt 90° onto supports.
Use supports for each mounting foot position.
Supports must span the full casing width to
avoid damages. Supports must be placed under
the load-bearing frame and not under the coil.
2) Remove and reposition lifting eyebolts or lift -
ing stirrups as shown in the illustrations.
3) Remove all mounting profiles.
4) Fit mounting feet on both sides of the casing
at all vacant mounting profile positions.
5) With all mounting feet in place, the unit is
ready for further positioning and installation.
Replace eyebolts Replace stirrup
4.4 Feet mounting for vertical airflow
Lifting eyebolts
Lifting stirrup