Alfa Laval AlfaBlue Junior DG, Инструкция по эксплуатации

Страница: 8 / 20

AHE00061EN 1904
8
Alfa Laval is a trademark registered and owned by Alfa Laval Corporate AB.
Alfa Laval reserves the right to change specification without prior notification.
All units are packed and shipped in horizontal
airflow position. For setup with vertical airflow,
the mounting feet (kit) must be mounted prior
to installation. For this purpose the unit must be
lifted and tilted 90° onto supports. Use supports
for each mounting foot position. The supports
must span the full casing width to avoid damage
to the finned coil.
Loosen fixing bolts and remove all mounting pro-
files. For DG 630 models also remove the lifting
lugs positioned on the opposite casing side.
Replace all mounting profiles with the sup -
plied mounting feet. Mounting feet should be
fitted on both sides of the casing at all vacant
mounting feet and lifting lug positions.
With all mounting feet in place, the unit is
ready for further positioning and installation.
4.3 Feet mounting for vertical airflow