Subject
Page
SAFETY INSTRUCTIONS AND WARNING
8
of
38
www.alfalaval.com
3.2.0
Safety Regulations during Installation
Read and follow the Operator’s manual before attempting to install or operate the
modules and supporting equipment.
Do not operate the system before installation is complete.
Install all equipment in accordance with requirements of the Local Electrical
Authority.
Ensure power is OFF before installation, inspection, assembling and
disassembling.
Ensure all pipe lines, Hoses and PHE are de-pressurized and emptied before
installation, inspection, assembling and disassembling.
The safety functions of the premises must be checked before the first start.
Only authorized and qualified personnel should carry out the installation.
All work on the machinery must be performed when it is not in operation and the
main power supply is switched off.
All local regulations regarding transport and lifting must be followed at all times.
3.3.0
Safety Regulations during Operation and Maintenance
Never put hands, other parts of your body or foreign objects into the machinery
without making sure the main supply has been switched off.
Do not attempt to do any kind of maintenance work on the unit itself until the
system has come to complete stop and check that the main power is SHUT OFF.
For inspection and maintenance of any component: Strictly follow the
corresponding technical documentation.
In case of any emegency puch E-STOP avilable on heater and pump panel.
High temperature
Parts of some equipment coming in contact with hot process liquid can
cause burns if touched.
Be careful when working near pipes, valves and equipment
Hot machine parts occur during operation of the plant, and then the user
must ensure that these cannot be touched by accident.
Chemicals
Safety precautions for use of chemicals: use eye protection and
gloves. Avoid skin contact, eye contact and contact with clothes.
Clean empty chemicals containers before disposal.
Chemicals are hazardous; Material Safety Data Sheets should be
read carefully before handling chemicals.
Make sure to locate eye shower and emergency shower before
start of handling corrosive chemicals!
