Subject
Page
SAFETY INSTRUCTIONS AND WARNING
7
of
38
www.alfalaval.com
3.1.0
General Safety Regulations
The following general safety rules must be followed on every occasion:
The installation and operating manual contains vital information that must be
considered during all handling of the CIP unit. All personnel who are in contact
with the equipment must read the operating and installation manual. The operating
manual should be kept available near the equipment.
If the safety regulations are not followed, there is a risk of injuries as well as
damage to the machinery and the surrounding environment. If these safety
regulations have not been followed, Alfa Laval cannot be claimed responsible.
WARNING
Emergency stop must be installed on control panel as per local regulations.
WARNING!
The CIP unit must never be used when there is a risk for poisonous or lethal
fumes or vapors to be released from the fouled equipment during CIP cleaning.
When connected to the equipment to be cleaned, the CIP unit is being part of an
open system why any fumes or vapors being released will be released out into
the atmosphere through mainly the tank.
When any risk of dangerous vapor or gas in the CIP cleaning system, gas detector
and protective breathing equipment must be worn.
Noise hazards
Use ear protection in noisy environments.
Crush hazards
Do not work under hanging load.
Wear head protection during installation and maintenance of the equipment.
Cut hazards
Wear gloves when handling machined parts.
