6
Roland TD-3
Type
Sens
Thold
Curve
Scan
ReTrg Can.
Mask
Xtalk
Splash
CY-6 10
2 Linear 2.5
6
8 40
Crash
CY-6 10
2 Linear 2.5
6
8 40
China
CY-6 10
2 Linear 2.5
6
8 40
Ride Bow
CY-6 8
2 Linear 2.5
6
8 40
Ride Bell
CY-6 12
0 Linear 2.5
6
8 40
Hi Hat
CY-6 10
2 Linear 2.5
6
8 40
Notes for using the Surge Triple-Zone Crash/Ride Cymbal:
1.
Connect one stereo cable from the bow trigger jack to the RIDE input on your module.
2.
Connect the other stereo cable from the bell trigger jack to any other available input on your
module.
IMPORTANT:
Make sure you have the two inputs set to trigger the appropriate sounds for
each kit:
Ride Input HEAD = Ride Bow sound
Ride Input RIM = Ride Edge sound
Other Input HEAD = Ride Bell sound
Other Input RIM = Ride Edge sound (same as Ride RIM input)
Notes for using the Surge Dual-Zone Ride Cymbal:
Use the included Y cable on the module end of the ride’s stereo cable. Plug the black tip plug into the
Ride input and the orange ring plug into any other available input.
Roland TMC-6
Type
Sens
Thold
Curve
Scan
ReTrg Can.
Mask
Xtalk
Splash
CY 10
4 Linear 2.5
8
8 40
Crash
CY 10
4 Linear 2.5
8
8 40
China
CY 10
4 Linear 2.5
8
8 40
Ride Bow
CY 8
4 Linear
2.5
8
8 40
Ride Bell
CY 12
0 Linear 2.5
8
8 40
Hi Hat
CY 10
4 Linear 2.5
8
8 40
Notes for using the Surge Triple-Zone Crash/Ride Cymbal:
1.
Connect one stereo cable from the bow trigger jack to the RIDE input on your module.
2.
Connect the other stereo cable from the bell trigger jack to any other available input on your
module.
