Alesis QuadraSynth Plus, Справочное руководство

Страница: 26 / 191

Your First Session With The QuadraSynth Plus: Chapter 2
QuadraSynth Plus Piano Reference Manual 27
Setting the Effects Level
Each Program can use up to four Sounds, for either layering or splitting
the keyboard. Each of these Sounds has its own effects send level and
effects bus assignment. Many of the Programs in the QuadraSynth Plus
use only one or two Sound layers, while others may use all four Sounds.
You can adjust the effect send amount for each Sound independently, or
you can view/edit all four sounds simultaneously.
¿ Press [PROGRAM] to access Program Play Mode, and select a
Program you wish to edit, using the methods described on page 14.
¡ Press [SELECT] to access Program Edit Mode.
¬ Press the [EFFECT] button (located among the DIRECT SELECT
buttons on the far left); the words “EFFECT - LEVEL” are underlined in
the display.
This is where you determine how much level will be sent from the current
Program sound layer to the effects processor, and on which of the four busses.
PROG
1
EDITING: PROGRAM SOUND 1
P AGE: 1
PITCH FIL TER AMP RANGE MOD EFFECT NAME
PLFO FLFO ALFO PENV FENV AENV TRACK
MISC.
ASSIGN – VOICE LEVEL EFFECT–LEVEL
Turn Quad Knob [1] to adjust the effect send level of the selected
Sound (1—4).
For the most dramatic effect, set this to 99.
ƒ Press the [EDIT 1] button to select another Sound to adjust.
The display will indicate “SOUND 1” or “SOUND 2,” etc., to indicate which
of the four Sounds is being edited.
H
Press the [EDIT 4] button to display the effect send levels of all
four Sounds simultaneously; use Quad Knobs [1] — [4] to adjust each
Sound’s effect level.
The display will indicate “SOUND 1 2 3 4.”
MIDI
CHAN
P R O G P R O G
1
PRESET
EDITING: PROGRAM SOUND 1
P AGE: 1
PITCH FIL TER AMP RANGE MOD EFFECT NAME
PLFO FLFO ALFO PENV FENV AENV TRACK
MISC.
ASSIGN – VOICE LEVEL EFFECT–LEVEL
2 3 4