Alesis MultiMix6FX, Справочное руководство

Страница: 23 / 38

A Tour of the MultiMix
2
21
POWER
ON
POWER INPUT PHANTOM
OFF
EFFECTS LEVEL
If you are using one of the MultiMix-6FX’s internal effects, this
knob controls the effect level.
LED Meters
These are the two rows of yellow, green and red lights you see in
the master section of the mixer. They are very versatile, allowing
you to view the signal level of the main mix and aux return
depending on which signal you have routed to the control room
mix.
POWER Indicator
When this LED is lit up, that means the POWER ON switch on
the rear of the mixer has been activated.
+48V Indicator
When this one is lit up, that means the PHANTOM ON switch on
the rear of the mixer has been activated and is sup48V
phantom power to all XLR mic inputs.
Rear of the Mixer
Here’s what you’ll find at the rear of the mixer.
Power Input
Here’s where you plug in your mixer’s external power supply.
You should always connect your power supply to the mixer
before you plug the power supply into an electrical outlet.
Power Supply Unit
This unit provides 18.5 VAC at 700 mA, more than enough to
keep your MultiMix-6FX running smoothly. As with nearly all
power supply units, this one tends to get warm when left on for a
while. This is perfectly normal.
Power On
Another easy one. Switch this one on and your mixer has power.
Switch it off and it doesn’t. Make sure that all master output knobs
are turned all the way down when powering your mixer up or
down.
The POWER INPUT is built
to accept
only the power
supply unit provided with
your MultiMix-6FX, or an AC
power supply that has the
same specs. Others probably
will not work.