3
AUDIO SETUP
The MULTIMIX 8 USB FX is a class-compliant device that can be used with
virtually any digital audio workstation or recording software that supports USB
audio. If you want to use the included software, insert the CD into your
computer and follow the on-screen instructions.
To enable your MULTIMIX 8 USB FX to send and receive audio to and from
your computer, follow the instructions below for your computer's operating
system:
WINDOWS 7:
1.
Use the included cable to connect the MULTIMIX 8 USB FX to your
computer.
2.
Go to
Start Menu Control Panel Hardware and Sound Sound
.
3.
Click the
Playback
tab and select
USB Audio Codec*
as the default
device.
4.
Click the
Recording
tab and select
USB Audio Codec*
as the default
device.
5.
Click
Properties
in the lower right-hand corner.
6.
In the new window, click the
Advanced
tab and select
2-channel, 16-bit,
44100 Hz (CD Quality)
as the default format.
7.
Uncheck both boxes under
Exclusive Mode
.
8.
Click the
Levels
tab and set the slider to "4."
9.
Click
OK
to close the
Properties
window.
10.
Click
OK
to close the
Sound
control panel.
WINDOWS VISTA:
1.
Use the included cable to connect the MULTIMIX 8 USB FX to your
computer.
2.
Go to
Start Menu Control Panel Sound
. (If you don't see
Sound
, select
Switch to Classic View
, and the
Sound
Control Panel
should become available.)
3.
Click the
Playback
tab and select
USB Audio Codec*
as the default device.
4.
Click the
Recording
tab and select
USB Audio Codec*
as the default device.
5.
Click
Properties
in the lower right-hand corner.
6.
In the new window, click the
Advanced
tab and select
2-channel, 16-bit, 44100 Hz (CD Quality)
as the default format.
7.
Uncheck both boxes under
Exclusive Mode
.
8.
Click
OK
to close the
Properties
window.
9.
Click
OK
to close the
Sound
control panel.
WINDOWS XP:
1.
Use the included cable to connect the MULTIMIX 8 USB FX to your computer.
2.
Go to
Start Menu Control Panel Sounds and Audio Devices
.
3.
Click the
Audio
tab.
4.
Under
Sound Playback
and
Sound Recording
, select
USB Audio Codec*
as the default device.
5.
Click
OK
.
MAC:
1.
Use the included cable to connect the MULTIMIX 8 USB FX to your computer.
2.
Go to
Applications Utilities Audio MIDI Setup
.
3.
In the
Audio Devices
tab under
System Settings
, select
USB Audio Codec*
as your
Default Input
and
Default
Output
.
4.
Close the window.
REAR PANEL FEATURES
1.
POWER IN –
Use the
included power adapter
to connect the
MULTIMIX 8 USB FX to
a power outlet. While
the power is switched
off, plug the power
supply into the MULTIMIX 8 USB FX first, then plug the power supply into a power outlet.
2.
POWER SWITCH –
Turns the MULTIMIX 8 USB FX on and off. Turn on the MULTIMIX 8 USB FX after all input devices
have been connected and before you turn on amplifiers. Turn off amplifiers before you turn off the MULTIMIX 8 USB
FX.
3.
PHANTOM POWER –
This switch activates and deactivates phantom power. When activated, phantom power supplies
+48V to
the
XLR mic inputs. Please note that most dynamic microphones do not require phantom power, while most
condenser microphones do. Consult your microphone’s documentation to find out whether it needs phantom power.
4.
USB PORT –
Use the included cable to connect the MULTIMIX 8 USB FX to a computer. MULTIMIX 8 USB FX requires
a USB 1.1 or higher (e.g. USB 2.0) connection.
Be sure your audio software program is
set up to receive audio via the
MULTIMIX 8 USB FX. This can usually
be done in your software's
"Preferences" or "Device Setup."
Please consult your software manual
for more information.
*
If you have other USB audio devices
connected to your computer, which may
have identical names, you may need to
try selecting each one until the
MULTIMIX 8 USB FX is recognized.
If you experience too much latency
after adjusting your software latency
settings, we recommend the free
ASIO4ALL (Audio Stream Input/Output)
driver for PC at
www.asio4all.com
.
ASIO drivers generally perform better
and with lower latency since they create
a more efficient communication
between audio devices and software.
1
2
3
4
Содержание MULTIMIX 8 USB FX
Страница 1: ...QUICKSTART GUIDE ...