Using the Alesis HD24XR
Berklee College of Music
MP241 Mix 1 /Using Alesis HD24XR
Page 3 of 4
Created by JAL 9/3/07
Setting Location Points
Active or current
“Locate Point”
“Locate 0”
“Set Locate”
Dedicated locate keys
1-6
“LOCATE” key
Looping
Looping cycles the HD24 between any two of the 25 location points… as long as the
“Loop Start” time preceedes the “Loop End” time. Setting the “Loop Start” and
“Loop End” points is done using the alphanumeric display, the “Locate Select” key
and the “Cursor Arrow” keys.
Setting Loop Points
Make the “Location Point” you want to be the “Loop Start” active in
the alphanumeric display by hitting “Locate Select” and scrolling with
the
cursor keys. Next, HOLD “Locate Select” and tap the left
cursor key. A “Start” indicator will turn on in the Locate Pt window. Use the
cursor keys again to find the “Location Point” you want to use for
the “Loop End”. Next, HOLD “Locate Select” and tap the left
cursor
key. A “End” indicator will turn on in the Locate Pt window.
Activating the Loop
Select “Auto Return” and “Auto Play” to activate the loop cycle.
