Alesis HARMONY61 Скачать руководство пользователя страница 13

Страница: 13 / 27

Performance Memory

Note:

Hold down both the

Store

and

buttons, then turn on the power. This operation will reset the performance memory to factory

default setting.

To save the panel settings:

Hold down the

Store

button, then press one of the

M1 - M4

buttons to save the current panel settings to that memory.

Note:

This operation will overwrite the previous data.

To recall a panel setting:

Press one of the

M1 - M4

buttons. This will recall the settings saved in that memory and reset the related parameters on the control

panel.

Note:

Performance memory cannot be recalled when Q.S. function is in use.

To select a memory bank:

Press the

Bank

button. The LCD will show the current bank number.

Press this button repeatedly to select a desired bank number.

Using The Sampler

The Harmony 61 Pro allows you to record your own sounds using the built-in microphone located above the LCD and then play them
using the keyboard. Each sample can contain up to 2 seconds of audio. User Samples will be stored at the end of the sound library.

Recording a user sample:

Press the

Mix

and

Record

buttons simultaneously to enter Sampler mode. The Sampler will then enter a standby mode, the LCD will

read “Standby,” and the center LED light will flash.

Now, use the data dial to select a slot in which to save the sample.

Once you have selected a slot, sample recording will be triggered by the sound itself. When the sound volume reaches the trigger
level, sampling will start automatically, and the LCD will read “Sampling”. When the sound volume drops beneath the trigger level or
when the recording time reaches 2 seconds, the Sampler will stop automatically and save the sound; the LCD will read “Finished”.

The pitch correction function is turned on by default. The sampled pitch will be automatically recognized and corrected to the nearest
key. When pitch correction is turned off, the sampled pitch will be corrected and set as C4. You can turn this function on or off in the

Function Menu

. See

Using the Function Menu

to learn more.

Note:

The next available empty slot will be selected automatically before the next sample recording begins. For example, if the first slot

has data, the second slot will be automatically selected. If all slots are used up, then the first slot will be selected. Please note that when
sampling again on the slot with data, the original data will be overwritten.

Playing a user sample:

After sampling is complete, the unit will return to Sound mode automatically. LCD will display the sample you’ve just recorded as a
sound named with the slot number, such as “User01”.

Play the keyboard to use this sample for performance.

Use the numeric buttons, the

[<] / [>]

buttons or the data dial to select other saved samples.

Use the

Touch Pad

to play your sample with effects.

Deleting a user sample:

Hold down the

[<]

and

[>]