www.aleratec.com
44
Using the 1:5 HDD Copy Cruiser IDE/SATA
Main Menu
Adv Setup
Adv Setup: Load Default
This function is used to restore all factory settings of the 1:5 HDD Cruiser back
to their original defaults.
1. Press and hold
ESC
for about three seconds to access the “Adv Setup”
menu. The following screen will be displayed.
2. Use the arrow buttons (
or
) to select “Load Default”. The following
screen will be displayed.
3. Press
ENT
to proceed to the following screen:
Press
ENT
to confirm loading defaults, or press
ESC
to cancel.
4. When all settings are restored to their original defaults the following
information will be displayed.
ESC
11. Adv Setup
ENT
ESC
11-07. Adv Setup
Load Default
ENT
ESC
Load Default
Config? Yes
ENT
ESC
Load Default
OK
ENT