Aleratec 1:3 DVD/CD LightScribe Duplicator SA, Быстрый старт

Страница: 19 / 24

www.aleratec.com 17
Making Disc-to-Disc Copies
- continued
e. 2 or 3 seconds after copying begins the following “Copy Progress” screen
will appear:
Note: It is normal to see the progress indicator stay at 0-10% and at
100% for approximately 30 seconds during CD duplication. Additionally
it is normal to see the progress indicator stay at 0-10% and at 100% for
up to 1 minute during DVD duplication. There is a delay caused by the
initializing and finalizing stage of disc duplication. Due to this delay, it is
normal to see progress indicators stay at 100% for up to several minutes
before moving on. Once the disc duplication is completed, successful
copies will be ejected and you will see the following display:
Counter Specified No Counter
“4012MB” indicates the capacity of the Master
Disc.
“481MB” indicates the current progress of the
duplication in terms of MB.
“12%” indicates the current progress of the
duplication.
“0/21” indicates you have a project size of 21
copies and you have made 0 copies so far.
“4012MB” indicates the capacity of the Master
Disc.
“481MB” indicates the current progress of the
duplication in terms of MB.
“12%” indicates the current progress of the
duplication.
“0” indicates that you have made 0 copies so
far.
“FAIL 0” indicates that you have no failure in
this run.
“PASS 3” indicates that you’ve just made 3
successful copies.
“3” indicates that you’ve successfully copied 3
copies so far.
Copying... 4012MB
0/21 12% 481MB
COPY TEST PRINT SOURCE
ESC ENT


Copying... 4012MB
0 12% 481MB
COPY TEST PRINT SOURCE
ESC ENT


PASS 3 FAIL 0 ( 3)
Waiting for Blanks
COPY TEST PRINT SOURCE
ESC ENT

