www.aleratec.com
2
Installation and Operation
Installation
Your Aleratec 1:3 Copy Cruiser BLU HLX is equipped with an eSATA port
that is a bridge to its three Blu-ray recorders. If your PC does not have an
eSATA port available you will need to install the PCI Express eSATA host
adapter (included) before you can use your 1:3 Copy Cruiser BLU HLX. For
best results we recommend using the host adapter included.
Please follow the instructions below to install the PCI Express eSATA host
adapter.
Power off your system.
1.
Disconnect the power cable from the outlet to cut all power to the system.
2.
Remove the cover of your system.
3.
Locate an unused PCI-Express slot for the eSATA host adapter. The
4.
empty slot should look like this:
