Aleratec 1:27 USB Copy Tower SA, Быстрый старт

Страница: 12 / 16

www.aleratec.com 10
Using the USB Duplicator
Asynchronous Copying - continued
2. Press the
OK
button on the display panel. The USB Duplicator will start to read
the source content into the system’s buffer and immediately start copying to
any loaded target USB flash drives.
3. Load the blank target flash drives into the USB Duplicator. The LCD will
display the number of blank media loaded and copying.
Note:
When copying is in process the Green LED on the front panel is
blinking. Do not take out the drive while it is copying. When copying
is finished the Green LED stays on (no blinking). If an error occurs
during the copy process a Red LED will display.
4. As finished drives are removed, and new blanks inserted, the display will show
the number of copies completed and the number of USB flash drives still in the
copying process. If the Copy fails, the LCD will display the number of flash
drives that failed and passed.
Note: During Asynchronous Copying you can use the UP and DOWN
arrow keys to check each flash drives copying status.
USB(953M) 93M
Reading...
OK
ESC


Pass: 0 Working
Fail: 0 3
OK
ESC


Pass: 5 Working
Fail: 0 2
OK
ESC

