2
OPERATING INSTRUCTIONS:
1. Use only with standard polarized 120 volt AC wall outlet
2. Adjust speed using the dial control in back of the fan:
0-Stop
1-Low
2-Medium
3-High
3. Tilt the angle by pushing the grill
USER SERVICING INSTRUCTIONS
a) Grasp the plug and remove from electrical socket. Do not unplug by pulling on
the cord.
b) To open the fuse cover, slide the access cover on top of the plug towards the blades.
c) Remove the old fuse carefully. Push the fuse from the other side or turn fuse holder
over to remove fuse.
d) To prevent risk of fire, replace only with 2.5 Amp, 125 Volt fuse.
e) To close the fuse cover, slide the access cover back on top of the plug.
Notice:
1. Do not use excessive force when installing the fuse. This may cause damages.
2. If the unit does not operate, verify correct rating of the fuse and installation in the proper position.
CLEANING/ MAINTENANCE INSTRUCTIONS:
WARNING:
To avoid electrical shock and personal injury, always unplug from electrical outlet before cleaning/ maintenance.
1. Do not allow water to drip on or enter the fan/ motor housing.
2. Only use a soft cloth with mild soap solution for cleaning.
3. Do not use any of the following cleanser: gasoline, thinner, or any other flammable chemicals.
TO CLEAN FAN BLADE OR GRILL:
WARNING:
To avoid electrical shock and personal injury, always unplug from electrical outlet before cleaning.
1. Open the clips.
2. Lift grill (1).
3. Remove the nut (8).
4. Clean the fan-blade by using a soft cloth with a mild soap solution. Please use caution around the motor housing area.
5. Do not allow the motor or other electrical components to be exposed to water. Reassemble after cleaning by
reversing above procedure.
6. Do not to let water or other liquid enter the inside of the motor.
ELECTRICAL RATINGS
120 Volts AC, 98 Amps, 60 Hz
SERVICE & SUPPORT
If you experience a problem or have questions regarding this product, please contact customer service at 1-800-733-4000