REPLACEMENT PARTS
TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:
Model Number
Was item missing, or was it damaged?
Description of part(s) needed and part
Purchase Date
number(s) as shown in Parts List (above)
Your company name
Color (Champagne Putty, Light Grey, Black)
Contact person's name
USSCo, 1 Pkwy North, Ste 100, Deerfield, IL 60015 Customer Service: (800) 733-4000
If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.
Shelf
302
Left Door
960LD
Right Door
960RD
Hinge Pin
944HP
Locking Handle (for right door)
RH-1
Cam (included with RH-1 handle)
LC-1
Cam Retainer Clip (included with RH-1 handle)
944CR
Lock Bar
960LB
Lock Bar Guide Insert (QTY 2)
944GI
Caster Frame
CK24-NC
Swivel Caster (QTY 2)
HARDW45
Swivel Caster with Brake (QTY 2)
HARDW44
PART DESCRIPTION
ALE-CM6624PY
Putty (66"h x 36w x 24"d)
•
•
•
•
•
•
•
Shelf Adjustment
1. Using a flat-head screwdriver, gently pull
the dimpled tab away from the
hole in the shelf edge.
This will allow the
shelf to be released
and lifted from the tab.
2. Place the shelf at the
desired level.
3. Insert the shelf edges
into the tabs at the
new location. Be sure
that the shelf is
securely fitted
into the tabs at
all points of
contact.
View from beneath shelf
Attaching the Casters
1. Consider where you want to place the two swivel
casters with brakes. If the cabinet will be placed
against the wall, we recommend placing the
braking casters along the front of the base.
2. After first making sure the cabinet is unloaded,
lay the cabinet on the floor with the door facing
up.
3. Attach two swivel casters and two braking swivel
casters to the caster frame using the nuts and
lockwashers provided. Use a 9/16" wrench to
tighten the casters securely.
NOTE:
All casters must be
tight for unit to work properly.
4. Carefully set the unit upright
on its casters. We recom-
mend two people perform
this step to prevent the unit
from rolling.
