Visit our website at
www.alemlube.com.au
or
www.alemlube.co.nz
3
Personal Safety
1 Wear safety glasses at all times when working with pump.
2 Wear a face shield, proper apparel and suitable respiratory equipment when pumping hazardous chemicals.
3 Keep work area clean, uncluttered, and properly lighted. Replace all unused tools and equipment.
4 Keep visitors at a safe distance from the work area.
5 Make workshop childproof with padlocks, master switches, and by removing starter keys.
WARNING
Failure to follow all General Safety Information can result in a fatality, personal injury and/or property damage!
LIMITED MANUFACTURER WARRANTY
DAYTON ONE-YEAR LIMITED WARRANTY
Dayton”’ Stainless Steel Rotary Drum Pump, Model covered in this manual, is warranted by Dayton Electric Mfg. Co. (Dayton) to
the original user against defects in workmanship or materials under normal use for one year after date of purchase. Any part which
is determined to be defective in material or workmanship and returned to an authorized service location, as Dayton designates,
shipping costs prepaid, will be, as the exclusive remedy, repaired or replaced at Dayton’s option. For limited warranty claim
procedures, see PROMPT DISPOSITION below. This limited warranty gives purchasers specific legal rights which vary from
jurisdiction to jurisdiction.
LIMITATION OF LIABILITY
To the extent allowable under applicable law, Dayton’s liability for consequential and incidental damages is expressly disclaimed.
Dayton’s liability in all events is limited to and shall not exceed the purchase price paid.
WARRANTY DISCLAIMER
Dayton has made a diligent effort to provide product information and illustrate the products in this literature accurately; however,
such information and illustrations are for the sole purpose of identification, and do not express or simply a warranty that the
products are MERCHANTABLE, or FIT FOR A PARTICULAR PURPOSE, or that the products will necessarily conform to the
illustrations or descriptions. Except as provided below, no warranty or affirmation of fact, expressed or implied, other than as
stated in the “LIMITED WARRANTY” above is made or authorized by Dayton.
PRODUCT SUITABILITY
Many jurisdictions have codes and regulations governing sales, construction, installation, and/or use of products for certain
purposes, which may vary from those in neighbouring areas. While Dayton attempts to assure that its products comply with such
codes, it cannot guarantee compliance, and cannot be responsible for how the product is installed or used. Before purchase
and use of a product, review the product applications, and all applicable national and local codes and regulations, and be sure
that the product, installation, and use will comply with them. Certain aspects of disclaimers are not applicable to consumer
products; e.g., (a) some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you; (b) also, some jurisdictions do not allow a limitation on how long an implied warranty
lasts, consequently the above limitation may not apply to you; and (c) by law, during the period of this Limited Warranty, any
implied warranties of implied merchantability or fitness for a particular purpose applicable to consumer products purchased by
consumers, may not be excluded or otherwise disclaimed.
PROMPT DISPOSITION
Dayton will make a good faith effort for prompt correction or other adjustment with respect to any product which proves to be
defective within limited warranty. For any product believed to be defective within limited warranty, first write or call dealer from
whom the product was purchased. Dealer will give additional directions. If unable to resolve satisfactorily, write to Dayton at
address below, giving dealer’s name, address, date, and number of dealer’s invoice, and describing the nature of the defect.
Title and risk of loss pass to buyer on delivery to common carrier. If product was damaged in transit to you, file claim with carrier.
Manufactured for Dayton Electric Mfg. Co., S959 W. Howard St., Niles, Illinois 60714 U.S.A.
NSW
TEL: (02) 9939 0711
FAX: (02) 9939 0411
QLD/PNG
TEL: (07) 3204 9166
FAX: (07) 3204 1224
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
WA
TEL: (08) 9209 3066
FAX: (08) 9209 3933
SA/NT
TEL: (08) 8241 7111
FAX: (08) 8241 7011
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
