Description
Model 5080A is a high volume, manually operated rotary action drum pump that delivers up to 100 litres per minute. It is
designed for refuelling of both on and off road vehicles and large machinery. The simple design of the 5080A allows
easy servicing if required. The pump comes complete with delivery hose and includes a replaceable filter.
*PLEASE NOTE, OIL GEARS BEFORE USE
.
(SAE 30 oil is recommended for this purpose).
Specifications
Visit our website at
www.alemlube.com.au
Email - [email protected]
Uses
Diesel fuel, petrol, kerosene and low viscosity oils up to SAE 30
Discharge Quantity
1 litre per rotation / 100 litres per minute
Materials
Cast Aluminium, Buna N Seals
Weight
7.0kgs
Size
Suction pipe: 32mm ID x 1m Delivery hose: 25mmID x 2.2m
Operating Instructions
1
Oil Gears Before Use
Before using model 5080A high volume rotary refuelling pump, make
sure that you fill the gear cover with oil. Fill with SAE 30 oil or equivalent
to the reference line through the lubrication bolt hole (as indicated on the
diagram). Inspect & top up periodically as required.
2
Revolution Direction
The handle turns in a clockwise direction and the pump discharges one
litre per one revolution of the handle.
3
Filter
A filter of #60 mesh polyethylene net is standard on the pump and it is
located at the bottom of the suction pipe. Rotating the handle and
therefore operating the pump may become harder if the filter is clogged
with other similar impurities that have been filtered out of the fuel or low
viscosity oil. Remove the filter periodically and clean with kerosene.
4
Cautions
Suitable liquids include most low viscosity liquids such as unleaded
petrol, kerosene and low viscosity oils. Although the pump can be used to
pump other liquids of high viscosity, the pump becomes harder to operate
and doing so will shorten the life of the pump & may void warranty.
Do not use this pump for any solvent or chemical transfer as these fluids
will dissolve the Buna N gaskets, etc. ( Use the 301-A, 401-A, 733, or 933
for stronger solvents).
Please note when pumping fuels like kerosene, petrol or diesel, these
products tend to “dry out” the internals of the pump causing parts “to
stick” and the pump not to prime and dispense. To stop this from
happening and to increase the working life of your pump, we recommend
you lubricate the vanes of the pump by dropping a few drops of oil into
the pump body by taking off downtube (2000-42) & lubricating at this
opening. Rotate the handle a few times.
Do not pump fluids containing dirt or particles such as waste oil.
Contaminated fluids may block the filter, preventing discharge, & may
damage the pump interior or cause other problems.
Refuelling Drum Pump with Filter
5080A
NSW
TEL: (02) 9939 0711
FAX: (02) 9939 0411
QLD/PNG
TEL: (07) 3889 8480
FAX: (07) 3889 8490
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
WA
TEL: (08) 9209 3066
FAX: (08) 9209 3933
SA/NT
TEL: (08) 8241 7111
FAX: (08) 8241 7011
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
OWNER’S MANUAL
