2
Initial Release 11-15
Alemite, LLC
COB LED Light
SER 393816
Table or bench mount
installation
1
Select a dry location within two feet
(609,8 mm)
of a 120 V AC electrical outlet.
2
Mount bracket ( fig. 1) directly onto
table or bench.
3
Line up mounting bracket with holes on
reel light unit and insert 8 in.
(203 mm)
pin ( fig. 2).
4
Secure 8 in.
(203 mm)
pin with cotter
pin ( fig. 2).
5
Adjust ball stop ( fig. 3) so light head
hangs at desired length.
6
Plug power cord into standard 120 V AC
electrical outlet.
Wall mount installation
7
Select a dry location within two feet
(609,8 mm)
of a
120 V AC
electrical outlet.
8
Mount bracket to nearest available wood
stud or sturdy wall material using appro-
priate screw fasteners (fig. 1), leaving at
least 24 in.
(609.8 mm)
between reel and
edge of any wall or door frame.
9
Line up mounting bracket with holes on
reel light unit and insert 8 in.
(203 mm)
pin ( fig. 2).
Ceiling mount
installation
1
Select a dry location within two feet
(609,8 mm)
of a 120 V AC electrical outlet.
2
Mount bracket directly into closest
ceiling joist or beam reinforced ceiling
beam. ( fig. 1).
Fig. 1
Fig. 2
Fig. 3
!
Notice
Do not mount reel to drywall or
any unsupported ceiling material that
cannot support significant torsion or
drag.
3
Insert reel into bracket, use care to line up
the mounting holes (fig. 2).
4
Secure 8 in.
(203 mm)
pin with cotter
pin ( fig. 2).
5
Adjust ball stop ( fig. 3) so light head
hangs at desired length.
6
Plug power cord into standard 120 V AC
electrical outlet.
!
Notice
Do not mount reel to any wall
material (including drywall and paneling)
that cannot support significant torsion or
drag.
10
Secure 8 in. (
203 mm
) pin with cotter
pin ( fig. 2).
11
Adjust ball stop ( fig. 3) so light head
hangs at desired length.
12
Plug power cord into standard
120 V AC electrical outlet.
