4
WARNING/MAINTENANCE
GENERAL:
• Carefully read the user’s manual and follow all directions.
• Before cleaning the speaker, always remove the mains cable from the wall
socket and switch off the speaker.
• Clean the cabinet with a slightly moist cloth.
• Never place or use the set in wet or humid space or environment.
• Ensure adequate heat dissipation; never cover the set nor place it directly next
to a heat source.
• Prevent damaging the mains cable and ensure it doesn’t cause a risk of tripping
or falling.
• Never disassemble the set; this may only be performed by qualified personnel.
• Only turn on the speaker after setting all volume controls to MINIMUM (0), to
avoid possible scares when switching on.
• Prolonged listening to high volume levels can cause hearing damage
BEFORE USE
The PAS-300 functions on the mains.
The PAS-300 satellites function on the built-in speakers in the subwoofer and
must be connected using the supplied speaker cables with Speakon plugs.
MAINS VOLTAGE:
Only connect the PAS-300 subwoofer to a mains voltage of 230 Volt. The mains in
most European countries works on 230 Volt.
Use the supplied power cord to connect the PAS-300 with the mains.
AMPLIFIER SETTINGS
POWER SWITCH:
Use the power switch to switch on the amplifier.
INPUT:
Connect an external audio source to the input of the PAS-300.
The connection can be made with XLR, Jack 6.3mm of cinch plugs.
LEFT/RIGHT VOLUME CONTROL (SATELLITE):
Use the LEFT and RIGHT volume controls to adjust the volume of the satellites.
When the volume reaches the maximum level, the related peak LED will illuminate.
