Alecto IVM-200, Руководство пользователя, Страница: 18 / 24

6 TIPS AND WARNINGS
6.1 General:
• Read the instruction manual carefully and follow all the instructions.
• Do not place or use the camera in a wet place or damp environment.
• Ensure proper ventilation for the heat; never cover the camera unit and/or the
power adapter(s), and never place it directly next to a heat source.
• Only use the supplied adapter(s); using a different type of adapter may cause
damage to the electronics.
• Make sure the power cables are not damaged, and ensure the wires will not
lead to stumbling or falling over.
• Never take apart the camera unit and/or the power adapter; this should only be
done by qualified personnel.
• The video connection is transferred through the public Internet and the
connection is secured as much as possible by today’s standards. Nevertheless
it can still be hacked, and if for some reason this occurs, we assume no
responsibility. We advise you to change the default password immediately (see
section 4.3 Wi-Fi settings), preferably with a combination of letters, numbers and
symbols.
6.2 Installation
• Only connect or disconnect the power adapter when it is unplugged from the
electrical wall outlet.
• Do not install the camera during a thunderstorm.
• Do not touch an un-insulated adapter cord unless the adapter is disconnected
from the electrical outlet.
6.3 Maintenance
• Clean the camera with a damp cloth, do not use any chemical cleaning agents.
Before cleaning, the power adapter should be disconnected.
6.4 Malfunction
• If the camera does not show an image or the sound does not work, check the
following:
- Has the camera been turned on?
- The correct UID code has been used.
- The correct password has been used.
- Is the camera correctly registered to your network.
- Restart the camera by taking it out of the electrical outlet.
- Reset the camera by pressing on the reset button located on the bottom of the
camera. The camera will reboot. Repeat the complete settings and operations