2. Installation
2.1 Removing the Belt Clip
a. Pull the Belt Clip Latch
away from the PMR.
b. While pulling the Belt
Clip Latch, push up
the Belt Clip as
shown in Fig. 1.
2.2 Installing the Belt Clip
a. Slide the Belt Clip into
the slot as shown in
Fig. 2.
b. A “click” indicates the
Belt Clip is locked into
position.
2.3 Installing the Batteries
a. Slide down the Battery compartment cover.
b.
Insert the 3xAAA batteries. Position the
batteries according to the polarity marking
on the battery compartment. See Fig.3
c. Replace the Battery cover. See Fig. 4.
Notes:
·
Use only same type and make of batteries on the PMR units.
·
The PMR units have a built-in Power Saver(PS) for maximum
battery life, but when not in use, turn the units OFF to serve
battery power
·
Remove the batteries if the units will not be used for a long period
of time.
Belt clip
latch
