-1-
-3-
-4-
-5-
-2-
-6-
-8-
-9-
-10-
-7-
2. Camera settings.
open the App
press (2)
select
when using multiple came-
ras, click here the desired
camera and make sure the
camera is ‘online’
click ‘Settings’
• Date and Time: to set the time
and date, in UTC enter the devi-
ation in relation to the “Coordi-
nated Universal Time”
during standard time: UTC+1
during daylight saving time:
UTC+2
• Media Settings: when a play-
back device is connected to the
smartphone or tablet, here you
can set whether this is a PAL or
NTSC based device.
• Security Settings: to change the camera password or to
add one guest user by entering a personal code and pres-
sing ‘Save’ in the top right corner. Attention: when entering
another new guest user, the old user will be overwritten.
• Network Settings: this shows whether the connection is
established via a LAN cable (ethernet) or wirelessly
(Wi-Fi); this option also shows the available networks.
• Alarm Settings:
- “Receive alarm message”: when set the 0, doorbell
calls will not be registered on the phone; please set this
to I for normal use.
- “Alarm push ID”: Overview of the accounts that receive
notifications from this camera (max. 5 accounts per
camera)
- “Alarm email”: the email address you enter here recei-
ves a photo of the person ringing the doorbell or of the
motion detected by the camera (see ‘Motion detection’
below). Keep in mind that the receipt of these emails
can be somewhat delayed in case of bad internet con-
nections or busy servers.
- “Motion detection”: to have the camera react ALSO to
motion in addition to the push-button. Keep in mind that
this makes the camera less suitable as a doorbell and
more as a motion alarm.
For reactions to motion, the lock
must be locked. When the lock
symbol is opened, the camera
will only react to the doorbell and
not to any motion.
Change this setting by pressing
the lock, the door camera will
emit a beep tone and the lock will
then either open of close.
- “Buzzer”: when set to I (on) and
the camera detects any motion
while the lock is closed, a siren
will sound from the camera which stops automatically
after 1, 2 or 3 minutes (adjustable after enabling this
function). This is why it’s recommended to set this
function to 0 (off).
- “PIR detection”: unavailable
• Record Settings:
- “Manual Recording”: use the ‘Record Switch’ switch to
instantly start or stop recording.
- “Alarm Recording”: the recording starts automatically
as soon as somebody presses the doorbell (or in case
of motion); here you can also adjust the recording
duration.
- Scheduled Recording”: to start camera recordings at a
preset time.
4. To add a new camera or to register it to another
smartphone.
open the App
press (4)
press ‘+’
select ‘Manual’ and enter
the camera ID and then
the camera password (this
is the device code, see
also ‘IDC-25 Installation’,
item 4.3)
click ‘Save’
IDC-25 OPERATION
iOS
1. Viewing camera image.
open the App
press (1)
click
the smartphone or tablet starts
searching for the camera
the camera image will then appear on the smartphone
see the next page for an explanation of the buttons
2. Somebody rings the bell.
the smartphone is activated and the image like the figure
below will appear on the phone while the set ringtone will
sound.
Press
‘View’ to
answer
the call
the following functions are now available:
2.1: actual date and time (see ‘IDC-25 Setup’)
2.2: no function
2.3: indication that the microphone of the smartphone
or tablet is enabled
2.4: press and hold this button for at least 1 second
to activate the electric door opener (the opener
remains powered for 5 seconds, after opening wait
at least 10 seconds before the door can be opened
again)
2.5: indication that the speaker of the smartphone is
enabled; press this button to change to ‘
’, the
speaker is now turned off, press again to turn the
speaker back on; by default the speaker is swit-
ched on each time, it’s not possible to change this
standard setting
2.6: press to make a photo of your visitor, see also the
next chapter
2.7: to disconnect the camera
2.8: to enable or disable the microphone (when the
microphone is disabled, the microphone icon (2.3)
will not be displayed); by default the microphone is
switched on each time, it’s not possible to change
this standard setting
2.9: this shows the image resolution, you can choose
from:
HD: 1280*720 pixels
SD: 640*360 pixels (standard)
LD: 320*180 pixels
After start-up, ‘SD’ will be selected automatically
2.10: this shows the number of smartphones or tablets
currently watching this image
3. Making photos:
while wat-
ching, press
the
button to
make a
photo of
the current
image
Viewing photos:
Open the App
Press
(3)
Click ‘Snapshot’
Press
to delete photos
(all photos will be deleted)
4. Viewing videos:
See ‘Record Settings’ in
‘IDC-25 Setup’ for making
video recordings
Open the App
Press (4)
Press (5)
Click ‘Playback’ and click
the desired video
The file names of these videos
provide the following informa-
tion:
2015-07-14_08:23:59_A.av (180S)
date time A= Alarm recording
length (*)
(doorbell pusher or motion)
M= Manual recording
S= Scheduled recording
- Above the list of recorded videos, you can set the day or
period to simplify searching for specific recordings.
- All recordings will be deleted when you format the
SD card (see IDC-25 Setup, chapter 2, item ‘Storage
Setting’).
- It’s not possible to copy or move recordings to external
devices.
- In ‘Alarm Recording’ and with the camera set to motion
detection, the recording will stop 1, 2 or 3 minutes after
the last
movement. This means that the total length of
a video may be a lot longer than the 1, 2 or 3 minutes
you’ve set.
5. Shake.
Use the ‘Shake’ (5) option to
have to camera search for all
registered cameras on the
network.
6. Alarm Management.
In ‘Alarm logs’ (6), a list will
appear with the times and
dates when the doorbell was
pressed or when the doorbell
camera detected movement.
7. No function.
DISCARDING THE DEVICE (ENVIRONMENT)
At the end of its useful live, this product may not
be discarded as regular domestic waste; it must be
brought to a collection point for the recycling of electric and
electrical equipment.
V1.0
IDC-25 SETUP
iOS
1. System settings.
Open the App and press the
(1) button to open the
‘System Settings’ menu
• at the top of the screen you’ll find the account number
• Account: this option shows the account information and
allows you to make changes
• About: to check the firmware version
• Log out: allows you to log out
• Defence Area: unavailable
• Storage Info: the doorbell camera contains a built-in SD
card of 8GB. This menu shows the total and remaining
memory capacity. This menu also allows you to format
the SD card (keep in mind that formatting the card will
delete all recordings).
The card is not accessible from the outside and cannot
be replaced.
The built-in SD card has a capacity of 8GB which is
enough for approx. 100 hours of continuous recording
(approx. 80MB per hour). When the card is full, the
oldest recording will be overwritten.
• Device Update: here you can have the App search for
any available updates for the camera software.
3. Camera name and password.
open the App
press (3)
select
when using multiple came-
ras, click here the desired
camera and make sure the camera
is ‘online’
click ‘Edit’
• Device Name: to assign a per-
sonal name to the camera
• Device password: to assign
a personal password to the
camera
press ‘Cancel’
to ignore the
call, a notifica-
tion will now
appear to in-
form you that
all new calls
for the coming
10 seconds
will not be
registered
2.10
2.9
2.7
2.6
2.2
2.1
2.5
2.4
2.3
2.8
1
4
3
2
1
5
4
+
3
5
6
3
2
7
