Alecto DVM-80, Руководство пользователя

Страница: 6 / 24

6
3 INSTALL
3.1 BABY UNIT:
Power:
Either the baby unit can be powered with the supplied power adapter or through
4x 1,5 Volt AA penlight batteries (add.). If the baby unit is regularly used mobile,
insert the batteries, but connect the adapter when you are at home. Once you
unplug, the adapter will switch to battery power. When you only use the baby
unit inside your home, then installing batteries is not required.
Batteries:
1. Unlock the battery door of the baby unit by pressing the buckle up a little with
your fingernail; the battery cover is now released from the baby unit.
2. Place 4 pieces 1,5 Volt batteries, size AA or penlight (R6) as indicated in the
battery compartment. Use preferably alkaline batteries of good quality.
Placing rechargeable batteries is allowed, but because the baby unit is not
equipped with a charging device, rechargeable batteries should, as soon as
they are empty, be loaded in an external battery charger.
3. Place the battery cover back on the baby unit and snap it.
Power adapter:
1. Connect the 6V power adapter with the thick plug to the 6 V DC connection
on the right side of the baby unit.
2. Insert the power adapter in a 230V power outlet.
Only use the supplied power adapter with the thick plug and model num-
ber S006MV0600080.
Make sure the baby cannot touch the baby unit or the cord.
Place the baby unit at least 2 meters away from the baby and
bundle too long wires with tape or
with specially for this purpose avai-
lable wire wraps.
>2m