2 Aldon® Spot Check Magnetic Laser Gauge #4022-26
Aldon Company, Inc. | 847.623.8800 | [email protected] | ALDONCO.com 7
LASER SETUP AND SETTINGS
Before using our
SPOT CHECK MAGNETIC LASER GAUGE
, while working in the
field, always install blue flag protection for worker safety (for additional
information, see inside back cover or visit
aldonco.com
).
•
Inches (1/32in resolution)
•
Feet (0.001ft resolution)
•
Feet & Inches (1/32in resolution)
•
Meters (0.001m resolution)
•
Centimeters (0.01cm resolution)
Aldon®
SPOT CHECK MAGNETIC LASER GAUGE
laser can display
measurements in the following units:
To adjust the units of measure press and hold the
[FUNC]
key in the middle of the keypad. When the
screen changes to a menu, release the button.
Using the [
LEFT ARROW
“-“
] and [
RIGHT ARROW
+”
] keys, rotate the menu to the “ft/m” setting. Then
press the
[FUNC]
key to enter into the units menu.
Using the [
LEFT ARROW
“-“
] and [
RIGHT ARROW “+”
]
keys, rotate the menu to the desired units of
measure. Press the
[FUNC]
key to set the units.
Step 1. Setup System Units
Aldon®
SPOT CHECK MAGNETIC LASER GAUGE
should arrive to you fully
assembled, inspected for accuracy, and ready to use. If the laser is reset to
factory defaults follow these simple steps to setup the laser.
RECOMMENDED PRODUCTS
Clamp-On Sign Holder
4015-01
Stop Crew At Work (RED)
6SCAW-R
Magnetic Rail-Top Sign Holder
4015-230
Additional and Custom
Sign Plates Available
Stop Employees Working (Blue)
6SEW-B
Step 2. Set Indexing Point
The
SPOT CHECK MAGNETIC LASER GAUGE
can take measurements from the
laser’s bottom edge, top edge, or from a tripod point. To use the laser for
measuring track gauge or overhead clearance, the laser must be set to index
from the laser’s bottom edge.
INDEX KEY
To select the indexing point press the index key on
the key pad.
Using the [left arrow “-“] and [right arrow “+”] keys,
rotate the menu to the image showing the yellow
arrow originating from the bottom of the laser. Press
the [Func] key to set the index point.
Additional Sign Holders Available
Sign Plates Sold Separately
Have A Question?
“ASK ALDON”
Visit
ALDONCO.com
to view our wide range of derails,
sign holders, track repair products and more.
Have A Question?
