24V Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
e-mail: [email protected]
1300 889 028
MODEL: №. CDI224 • 09/2020 • 63524
(toll free)
16
Rechargeable Battery Display
1. The rechargeable battery display (7) indicates the level of power left in the
battery pack (9). To check the power of the battery, press on the trigger
switch (8) to activate the drill, and the lights will be activated.
2. When all 3 lights are lit up, the battery is fully charged. When 2 lights are
lit up, the battery is at approx 50-60%. When only 1 light is lit up, there is
approx 20% power left in the battery pack (9).
2 Speed gearbox
The 2 Speed Gearbox allows you to select a gear
with the optimum speed and torque to suit the
application.
NOTE:
When changing the two speed high /
low gear selector (4), ensure the drill/driver is not
operating.
1. To select the LOW gear (low speed, high torque
setting), push the two speed high / low gear
selector (4) backward, towards the back of the drill/
driver. The number “1” will be displayed (Fig F).
2. To select the HIGH gear (high speed, low torque
setting), push the two speed high / low gear selector (4) forward, towards the
chuck. The number “2” will be displayed (Fig F).
Trigger switch
1. Use the forward/reverse switch (6) to select the
direction of rotation (Fig G), then pull the trigger
(8) (Fig H). This trigger switch is an electronic
variable speed control which enables the user
to vary the speed continuously.
The speed varies according to how far the
trigger switch is depressed.
The further it is depressed the faster the chuck
will rotate and the lighter it is depressed, the
slower it will rotate.
2
1
The picture here shows the
gear selector forward so
the drill/driver is in High
speed, with the number 2
displayed.
F.
G.