manualshive.com logo in svg

ALDI WLBCF310, Руководство пользователя

Поделиться
Скачать
ALDI WLBCF310 Скачать руководство пользователя страница 20

Understanding and using these operating instructions

750W Submersible Water Pump

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909

MODEL: №. 

WLBCF310  •  08/2015  •  49290

(toll free)

18

Operating instructions and safety notes!

AFTER SALES SUPPORT

(toll free)

750W Submersible Water Pump

e-mail: [email protected]

1800 909 909

MODEL: №. 

WLBCF310  •  08/2015  •  49290

Maintenance & Cleaning

WARNING: 

 Ensure the water Pump is disconnected from the mains power 

supply before undertaking any maintenance.
To ensure a long service life, we recommend regular checks and care  
of your Pump.

•    If the Pump is not going to be used for a long time, rinse and empty 

 

the unit.

•   If there is a risk of frost, the Pump needs to be emptied and dry.
•    If the Pump becomes blocked, remove the outlet fitting and remove the 

blockage if possible. If the blockage is on the input side, the 3 screws 
retaining the base can be removed to remove the base and cover. Clear 
the blockage from the impeller. Then replace the cover and base and the 
3 assembly screws.

NOTE:

 DO NOT separate the lower and upper housing of the Pump.

•    Before using the water Pump, always inspect it visually. Do not use the 

Pump if it is cracked and/or damaged. If the water Pump is damaged, con-
tact customer service.

•   Make sure that electrical connections are protected from inundations.
•    Protect the plug and the power cable from heat, oil or sharp edges and 

away from water and moisture.

•   If damaged, the power cable must be replaced by a qualified electrician. 
•   If the supply cord is damaged, it must be replaced with a special cord or 

assembly, available from the manufacturer or service agent.

Storage:

Ensure you store your water Pump and accessories out of childrens reach 
in a dark and dry place at above freezing temperature.  The ideal storage 
temperature is between 5° and 30° C

Содержание WLBCF310

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды