AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
34
Electric Impact Shredder – GLEKS 2440
Set up
3. Fitting the plunger mounting to the chassis (Fig. 8 & Fig. 9)
– Press the small “c” of the plunger mounting
10
onto the chassis
5
as shown in Fig. 8.
– Then the plunger
4
can fitted into the large “c” of the plunger mounting
10
(Fig. 9).
Fig. 9
10
4
Fig. 8
10
5
4. Fitting the optional debris bag (Not supplied, Fig. 10) to the shredder
As an option you can purchase a debris bag from the manufacturer via the contact
information of service address indicated on the warranty card, or the contact information at
the foot of the pages.
You will need to provide the product data and part number of the debris bag, from the
Ordering replacement parts section on Page 45.
If you purchase a debris bag, then it can be fitted to the shredder as below:
• Fit the debris bag
22
using the loops on the bag, and hang them onto the hooks
23
provided on the chassis
5
as shown in Fig. 10. (See also Fig. 1) .
Fig. 10
23
22
66926_3430345_11026_ug_inner.indd 34
22/03/2016 3:22 pm
