Assembly
9
Basic cleaning
1. Remove the packaging material and all plastic wrappings.
2. Clean all parts of the product before first use as described in the chapter
“Cleaning and maintenance”.
Assembly
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Assemble the product on a soft and clean surface. Place a
blanket under the product to avoid scratching or damaging
the surfaces.
Assembly steps
Assemble the product following the instructions and illustrations below.
• At least two competent persons are required to assemble the
product to make assembly easier and avoid injury.
• Use the hex keys
11
/
22
(provided), wrench
23
(provided)
and a crosshead screwdriver
24
(not provided) to assemble the
product.
• Only loosely fasten all bolts initially and fully tighten all bolts when
the assembly is completed.
1 Assembling the rocking chairs ........................................................................10
2 Assembling the table ....................................................................................... 11