3. Clean all smooth surfaces with a damp cloth.
4. Apply some oil (e.g. sewing machine oil or printer’s oil) on the cutting blade to
keep it running smoothly and let the device operate briefly to distribute the oil.
Storage
NOTE!
Risk of damage!
Improper storage of the device can result in damage.
- Allow the device to completely cool down.
- Place the device so that it can’t fall into water.
- Store the device in a clean, dry, frost-protected place out of
the reach of children.
1. Thoroughly clean the device (see “Cleaning”).
2. Store the battery at 50–80% capacity. If the battery is stored for over 6 months,
check the charge level after this period and recharge the battery if necessary.
3. If possible, pack the device in the original packaging.
4. Store the device in a location away from sunlight and other heat sources.
5. Store the device and accessories at a temperature b10 °C and +30 °C.
Transport
Transport the device and its accessories in the original packaging and protect them
from blows and vibrations..
Troubleshooting
Problem
Possible cause
Remedy
Motor does not run.
Battery empty.
Charge the battery.
Battery faulty,
on/off switch faulty.
Contact customer service.
Motor’s overload protection
triggered because the motor is
overloaded or overheated.
Allow the device to cool down
for 15–20 minutes.
Cleaning
24
