First use
13
First use
WARNING!
Risk of injury!
Packaging material and small parts pose a risk of injury to children. Children
may get caught in the packaging wrapper or swallow small parts and choke
on them.
− Do not allow children to play with the packaging wrapper or small parts.
Checking the product and package contents
1. Take the product out of the packaging.
2. Check whether the product or the individual parts are damaged. If this is the case,
do not use the product. Contact the manufacturer at the service address specified
on the warranty card.
3. Check to make sure that the delivery is complete (see
Fig. A
).
Use
Attaching the belt clip
The belt clip
3
can be attached to either side of the product.
− Use the screw
4
to attach the belt clip to the product (see
Fig. A
).
Inserting a bit
Proceed as follows to clamp a bit or a bit coupler in place:
1. Make sure that the product is not operational.
2. Lock the on/off switch
6
by moving the direction switch
2
to the intermediate
position.
3. Pull the locking sleeve
1
forward.
4. Insert the bit all the way into the chuck
7
(see
Fig. D
).
5. Let go of the locking sleeve to secure the bit in place.
6. To remove the bit, pull the locking sleeve forward (see
Fig. E
).
