ALDI FERREX 63349, Руководство пользователя

Страница: 22 / 28

AFTER SALES SUPPORT
(toll free)
20V Pressure Spray Gun
e-mail: info.aldi@positecgroup.com 1300 889 028
MODEL No.: CHW18W.91 • 01/2021 • 63349
19
Symptom Possible causes Solution
Spray Gun
turns on but
does not draw
any water, or
there is not
sufficient
pressure.
Hose adapter (3) is too high
above the water source
surface.
Lower the spray gun below 1.5m.
Hose filter (13) is blocked.
Take out the hose filter (13) and rinse
the parts with clean water. (See Fig. J1,
J2)
The garden hose is not well
connected to the machine.
Check and reattach the garden hose
tightly. (See Fig. D2)
Hose adapter (3) loose.
Tighten the hose adapter (3) securely
with a spanner (not supplied).
The hose filter (13) screen is
missing or damaged. (See
Fig. E2)
Contact Customer Service on 1300
889 028 for replacement or purchase
of this filter.
Pump, hose, or other parts
are frozen due to outside
temperatures.
Wait for the pump, hose or other parts
to thaw.
Hose kinks. Straighten out the 6m hose (11).
Additional air be sucked into
the spray gun.
Remove the pressure extension lance
(7) to eliminate the air, or remove the
multi nozzle adaptor (9) to drain all the
water completely. Then reattach the
extension lance (7) or the multi nozzle
adaptor (9).
J1
J2
Troubleshooting