Spotlight Tripod Lamp
Assembly Instruc�ons
1)
Secure the legs to the light fi�ng
using the long bolt, split washer and
cap nut.
2)
Insert the lower half of the leg into
the top half and screw the threaded rod
into place. Add the rubber washer, metal
washer and wing-nut in order, to the
threaded rod. Extend all three legs into
posi�on, ensuring all legs are
at equal level.
3)
Secure all three legs by �ghtening the
wing-nut.
4)
Using the short bolt, split washer and
wing-nut connect all three support arms.
5)
Fit the lamp body to the tripod by
fi�ng the bracket spigot into the tube at
the top of the tripod.
6)
Tighten the set screw on the tripod
tube to lock posi�on.
7)
To fit or replace the bulb, open the
toggle clip on the lamp body, and hinge
the front down. Screw the bulb into the
holder, close the front and latch the
toggle clip. If replacing the bulb allow at
least 10 mins for the bulb to cool. Always
unplug the lamp before removing or
installing a bulb.
Care and Use
Before cleaning disconnect the lamp from the mains at the wall.
Wipe clean with a so� dry cloth. Do not use abrasive cleaners.
Safety
WARNING!
The lamp will become hot during use. Avoid contact
with the hot lamp, especially direct contact with the bulb. For
indoor use only. Ensure all legs and suppor�ng arms are secure
and in place before use.
Set-up and Assembly
Tools Required
: Cross head screwdriver, 10mm Spanner
To assemble the lamp follow the instruc�ons on the opposite
page. Take care to ensure all screws and bolts are �ght
before use.
Disposal
Please recycle all packaging in an environmentally friendly way by bringing
it to a public collec�on centre.
The bin logo with a black line underneath (WEEE logo) refers to the
disposal of Waste Electrical and Electronic Equipment according to
Direc�ve 2002/96/EC. Items with this logo must not be disposed of with
household waste.
If the lamp can not be used any more, each consumer is obligated by law to
dispose of old devices separately from household waste, e.g. at a local
recycling facility. The external flexible cable of this luminaire cannot be
replaced; if the cord is damaged, the luminaire shall be destroyed.
Recycling facili�es will dispose of the device avoiding any poten�al effects
on the environment or human health, due to the presence of any
hazardous substances or materials use in construc�on.
x3 long bolt
x3 threaded rod
x3 rubber washer
x3 metal washer
x3 cap nut
x4 split washer
x1 set screw
x4 wing-nut
x1 short bolt
