manualshive.com logo in svg

ALDI 705156, Руководство пользователя

Поделиться
Скачать
ALDI 705156 Скачать руководство пользователя страница 26

23

2-in-1 Chainsaw with Telescopic Pole

AFTER SALES SUPPORT

e-mail: [email protected]

1300 889 028

MODEL: N

o

. 

705156 · 03/2021 · GCS250F

(toll free)

AFTER SALES SUPPORT

(toll free)

e-mail: [email protected]

1300 889 028

MODEL: N

o

. 

705156 · 03/2021 · GCS250F

Operation

1. Switching on and off

WARNING: Check the voltage and current 

supply: The voltage and current supply 

must comply with the ratings on the 

product plate.

For switching on the chainsaw:

1. To start the chainsaw, connect the power plug to 

the mains power outlet socket.
2. Press the lock-off button (14), then fully press the on/off switch (2) and hold 

in this position. The lock-off button (14) can now be released (Fig H).

For switching off the chainsaw:

1. Release the on/off switch (2), the chainsaw will stop.
2. Disconnect the power plug from the mains socket when not in use.

Chainsaw applications

WARNING: Do not use the chainsaw if you are tired or under the 

influence of drugs, alcohol or medication.

WARNING: If the chain is stuck during operation, release the on/off 

switch immediately, then remove the chainsaw from the cut.

WARNING: If you are unfamiliar with the following cutting 

procedures, ensure you fully read and understand the instructions 

1

2

H

G2

G3

G4

Содержание 705156













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды