
AUS
WDV12
Assembly/Operation
AFTER SALES SUPPORT
15
1300 855 831
MODEL: WDV12 PRODUCT CODE: 703406 10/2020
Fitting the suction hose (Fig. 7)
Connect the suction hose (11) to the corresponding connector on the wet and dry
vacuum cleaner, depending on the application required.
Vacuuming:
Connect the suction hose (11) to the suction hose connector (4).
Blowing:
Connect the suction hose (11) to the blow connector (10).
Mounting the suction tube, hose and nozzles (Fig. 8)
1 Push the 3 parts of the suction tube (17) together.
2 Connect the 3-part suction tube (17) with the suction hose (11).
3
Mount the floor nozzle (15) or the crevice nozzle (16) onto 3-part suction tube
(17).
VIII. Operation
m
Warning!
Switch off the appliance if liquid or foam is emitted with the ex
-
haust air when wet vacuum cleaning.
On/Off switch (Fig. 1.1)
Press the On/Off switch (2) to switch on.
Press the On/Off switch (2) again to switch off.
Dry vacuuming (Fig. 1.3)
Use the paper bag (13) and the cloth filter (14) for dry vacuuming. Always ensure that
the filters are correctly mounted.
Use the floor nozzle (15) for surface cleaning applications. The crevice nozzle (16) is
used for hard to reach areas.
The paper bag (13) is full, when the suction function is noticeably reduced. For emp-
tying instructions, read the "Maintenance and cleaning" chapter.