140cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909
MODEL: №. 52371 • 03/2016 • 52371
(toll free)
20
AFTER SALES SUPPORT
(toll free)
140cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]
1800 909 909
MODEL: №. 52371 • 03/2016 • 52371
Starting the engine
NOTE:
Before starting the mower check the oil and fuel levels. The motor
MUST be filled with 470ml of SAE 10W-30 BEFORE starting. Fresh unleaded
fuel must be used in this unit. Do NOT use Ethanol based fuels. Do NOT mix
oil with fuel.
Warranty will be void if the engine becomes faulty due to insufficient oil and
fuel levels.
For starting, ensure the mower is set to the height setting so the blades are
not resting deep into the grass.
1. Move the motor throttle control (2) to the “START “ position. (Fig P)
2. Depress the priming bulb (29) fully 3 times.
3. Firmly hold the recoil starter (15) & pull slowly until resistance is felt, then
pull rapidly. (Fig Q)
4. Once the lawn mower has started and warmed
up (approximately 20-30 seconds) move the
throttle control (2) to the “RUN” position to
increase the engine speed. (Fig R)
START
RUN
OFF
Move the motor
throttle control
(2) to the rabbit
position for all full
power mowing
Always have the
motor throttle
control (2) in this
position when
starting a cold
engine.
P.
Q.
R.