14
Device Start-Up
14
RECOMMENDATION
Before turning on your new device, inspect the condition of the
ventilation ducts. Clean the ducts before turning on your device.
If building construction has not yet been completed, we
recommend that you wait until work has been finished before
starting up your device. An abnormal volume of dust in the air
could clog the device filters and cause damage to the motors.
Ensure that all diffusers are opened to their maximum capacity
before turning on your device. It is common to notice a faint
smell of burning upon the first start-up.
CAUTION
This device should be installed and balanced by a contractor
specializing in ventilation services.
WARNING
Electrical voltage remain in VFD for 5 minutes minimum after
input circuits have been opened and the following electrical
components have been activated:
Speed variator for the thermal wheel motor;
Speed variator for the ventilator motors.
300952 V1.0
Tél. Can.: 1-800-262-0916 Usa.:1-800-255-7749
www.aldes.com
