aldes Everest XH, Руководство по установке, Страница: 15 / 32

15 15
2.9.2 Connections Electrical cables-power and control connections
Unscrew the cruciform screw of the access door to the terminal block. Then unscrew the 2 cable gland support screws. Thread the cables through
cable glands in order to ensure they are sealed. After connecting the power and control cables, install a seal between the edges of the cable gland
support and the junction box.
Watertight seal on the edges of
the cable gland support
The rigid power cable conductors fi tted with connectors can be plugged directly into the spring terminals (no tools required). Conductors can be
released using a screwdriver and turning the orange latch located in front of the conductor’s insertion hole.
Flexible conductors without connectors must be inserted by pressing the latch to release the spring (see photo below).
By applying a very light force on the latch, you can check that the conductor is correctly inserted if the latch goes in without resistance by 1mm.
The jumpers plug into the holes in the terminal provided for this purpose (see photo below).
Conductor to terminal connection Jumper connection to terminal (for input/exhaust dampers)
3 terminal jumper 2 terminal jumper