Alderon Industries, LLC - Leading Edge Control Products | 218.483.3034 | [email protected] | alderonind.com
IOM000025B_Float Cable Attachments | March 23, 2020 4:52 PM
Stainless Steel Pipe Clamp, RubberLox™ Pipe Clamp,
Cast Iron Cable Weight, and Plastic Cable Weight
Float Cable Attachments |
Quick Start Guides
(Fig. 1)
1A
1B
1C
(Fig. 4)
(Fig. 3)
(Fig. 2)
Control Switches (Narrow Angle)
Minimum recommended tether length is 3.5 inches
2A
2B
Tether Length
2C
Pump Switches (Wide Angle)
Minimum recommended tether length is 3.5 inches
Stainless Steel Pipe Clamp
Scan for full product details
(lift)
(slide)
(Fig. 1)
Control Switches (Narrow Angle)
Minimum recommended tether length is 3.5 inches
Pump Switches (Wide Angle)
Minimum recommended tether length is 3.5 inches
Tether
Length
(Fig. 2)
1st Notch = 14 AWG
2nd Notch = 16 AWG
3rd Notch = 18 AWG
Tabs on cable clip
clicks into notch
(Fig. 3)
(Fig. 4)
FLOAT TREE
Plastic Cable Weight
Scan for full product details
RubberLox
™
Pipe Clamp
Cable Placement Area
(Fig. 1)
Tether
Length
(Fig. 2)
Control Switches (Narrow Angle)
Minimum recommended tether length is 3.5 inches
Pump Switches (Wide Angle)
Minimum recommended tether length is 3.5 inches
(Fig. 3)
Cast Iron Cable Weight
Control Switch
“High Alarm”
Pump Switch
(Fig. 3)
Activation Level
(Fig. 4)
1A
(Fig. 1)
1B
Outside Halves
(front/back)
Inside Halves
(front/back)
(Fig. 2)
Tether
Length
(*) Correct installation position
example, narrow end up.
Control Switches
(Narrow Angle)
Minimum recommended tether
length is 6 inches
Pump Switches
(Wide Angle)
Minimum recommended tether
length is 6 inches
