Activated functions
Shows the various functions
which have been activated. This
also provides a shortcut, allowing
you to go directly to the relevant
activated function so that you can
define new settings or disable it.
* ** LPG bottle full/empty
The symbol is displayed when the
sensor on DuoControl is connected
and activated. If EisEX is installed a
snowflake is shown inside the gas
bottle.
Green bottle = Bottle full
Red bottle = Bottle empty
Green LED
Indicates that the panel/boiler is on.
If it changes to red it indicates that
there is an error message.
Circulation pump
Shows when the circulation pump
is in operation.
Indoor temperature
Shows the indoor temperature.
Outdoor temperature
Shows the outdoor temperature
(if sensor is installed).
Clock
Shows day and time.
On/Off button
Main switch for boiler.
230 V
Shows when 230 V is connected to
the boiler.
High altitude mode
The symbol flashes if the high
altitude mode is activated.
The symbol flashes during heat up
of *Alde Flow when set in more hot
water mode.
Tools menu
It is possible to proceed from the
settings menu to the tools menu
with the control panel’s other
functions.
Setting indoor temperature required
The temperature can be set from +5°C
to +30°C in intervals of 0.5°C.
Heating with 230 V electrical
heating cartridge
Three output selections: 1, 2 or 3 kW.
The higher the output you select the
faster the heating.
Heating with LPG
The boiler works on the LPG burner.
The output is controlled automatically
according to heating requirement.
AC lighting
Turn AC lighting off and on.
Hot water
Three different settings.
No hot water, normal operation
and more hot water. With more hot
water the boiler temporarily raise
the water temperature from 50°C
to 65°C. The boiler returns to nor-
mal operation after 30 minutes.
MENU button
Button to activate the settings
menu.
The control panel is divided into three menu categories:
Standby Screen.
The time, internal and external temperature, and what is connected to the Alde Compact 3020 HE
are shown here.
Main Menu.
This is where all basic settings are defined for heating, such as the required temperature, extra hot water
and your choice of power; gas or electricity, or perhaps both.
Settings Menu.
You can adjust and activate lots of additional functions for your Alde Compact 3020 HE here, giving
you a top quality heating system. Find out more about this on the next page.
* ** Complete automatic climate control system (ACC)
If you have a Truma Aventa Comfort installed and con-
nected to the panel, then the AC button is visible and it
is possible to control AC from the panel. This function
makes it possible to have a fully automated climate
control for both heating, cooling and hot water.
NB.
* The symbol for the function is displayed in the control panel only when an optional card is installed.
** The product must be installed and activated for this function to be available.
Day mode
The symbol is displayed when
the function is on and turns
green when activated.
Night mode
The symbol is displayed when the
function is on and turns green
when activated.
Automatic start of the boiler
The symbol is displayed when
the function is activated.
Standby Screen
Main Menu
Quick guide for Alde Touchpanel 3020 HE
