Alcorn Mcbride RideAmp, Руководство пользователя

Страница: 17 / 24

17
May 7, 2020
NETWORK
The RideAmp provides a total of two M12 X-Coded network ports. These ports are devoted to a 4x0 network
audio interface that supports the AES67 and Dante standards. When using Dante, these ports also pass back
important status information via the network link to RidePlayer for monitoring amplifier health.
Two connectors are provided for each of these network connections to allow multiple RideAmp units to be daisy-
chained without the need for an external M12 Ethernet switch.
Note that these audio inputs are simultaneously active along with the balanced analog inputs.
POWER
RideAmp is designed to accept either a 24VDC or 48VDC power source. Two inline automotive blade fuses
(20A/80V) are accessible on the RideAmp side panel. Voltage levels are electronically monitored, and low voltage
conditions can be reported back via the network audio connection to RidePlayer.
Connector Information
Connector Type Molex Mini-Fit Sr.
Mating Connector Molex 0428160212
Mating Pins Molex 0428150012
Recommended Wire 8 AWG Stranded
Pinouts
Analog In
DC (-) 1
DC (+) 2