Alcorn Mcbride 8 TraXX/E, Руководство пользователя

Страница: 26 / 56

Page 24 March 23, 2012 • Alcorn McBride 8TraXX/E User’s Manual • Rev 2.6
Add/Edit Event
Now for the fun part! Click on
Add to add a trigger event to one of the
inputs, buttons, or input groups. The Add/Edit Event window will appear.
The best way to cause the 8TraXX/E to play something on startup is
to select the
Device Powered On Trigger Type.
Once you have chosen where the event is being triggered from, you can
select either an
Active On or Active Off Trigger Edge . This allows the
8TraXX/E to respond to either normally-open or normally-closed input
sources.
In the Event field you specify exactly what action you want the Event to
perform. You can have it play a file or you can specify a Custom Command ,
where you can use any command out of the Command Reference in this
manual.
The Configuration File
is named
“CONFIG.LST” which
the 8TraXX/E always
loads on startup.
Click Add once you’ve finished making your choices and the trigger will
be added to the 8TraXX/E configuration file.
Now you need to save your file. To do this select File…Export
Configuration… and choose the destination. You can copy it to your hard
drive and then copy it to the 8TraXX/E Compact Flash and insert it into
the unit.
Select One of the 8 Front Panel Buttons
Select One of the 8 Rear Panel Buttons
(note: any inputs previously assigned to Input Groups will
not appear in the list)
Select One of the Input Groups (if any are assigned)
OR
OR
OR
Select “Device Powered On” make to make event
happen on bootup.