ALCON ALCON-7, Руководство по эксплуатации, Страница: 13 / 16

FLASH FUNCTION
The FLASH button can be used to get a new dial tone without pressing .
You can also use the flash function to obtain special services, such as Call Waiting from your local
PTT or PBX.
If you subscribe to “Call Waiting” :
1. When a call comes in when you are in an outside call
conversation, you will hear a soft “do-do” sound.
2. Press FLASH. The first caller is put on hold and you
can converse with the second caller.
3. Press FLASH again to talk to the first caller. The
second caller is then put on hold.
NOTE :
●
If your telephone company offers special services such as “Call Waiting”, the FLASH button is unable
to activate a new dial tone. The flash time for this system is 0.6 seconds.
TEMPORARY TONE DIALING
If your home is equipped with pulse dialing and your telephone is set to the pulse mode, you can
still change it to the tone dialing mode temporarily. This allows you to access special services
available to tone systems (e.g., electronic banking systems and remote-control answering
machines).
1. Dial the number you want to call.
2. When your call goes through, press * .
NOTE:
●
The telephone will stay in the tone mode until the call ends, then it will returns to the pulse mode
automatically.
Setting a Representative number for
Remote/ Mobile Unit
Setting your Remote/ Mobile unit representative number on the Base unit.
Before setting
●
Set the POWER switch of Remote/ Mobile unit to OFF.
Base Unit
1. Press CALL of the Base unit (indicator will illuminate),
and then #. Press the digit button No. which you want
the Remote/ Mobile unit to be represented by (No.1-4 ).
The digit button indicator (red light) will flash.
13
3
2
1