23
5. Recall mode
Depending on your country and network operator, your Studio has the recall
time set as 600 ms (RECALL 2). It is unlikely that you need to change this
setting unless advised to do so.
1. Press
Menu/Ok
, scroll
Calls list/Down
to
« SETUP »
and press
Menu/Ok
.
2. Scroll
Calls list/Down
to
« RECALL »
and press
Menu/Ok
.
3. Press
Calls list/Up
or
Calls list/Down
to select
« RECALL 1 »
(short flash
time) or
« RECALL 2 »
(long flash time) and press
Menu/Ok
to confirm.
6. Restore default settings
You can restore your Studio to its default (original) settings. All the handsets
that are registered to the base will be retained.
WARNING
Resetting your phone to its default settings will delete all entries in the
Phonebook and Calls list. All handset and base settings will also be reset.
1. Press
Menu/Ok
, scroll
Calls list/Down
to
« SETUP »
and press
Menu/Ok
.
2. Scroll
Calls list/Down
to
« DEFAULT »
and press
Menu/Ok
.
3. Enter the 4 digit PIN code (default = 0000) and press
Menu/Ok
. The
display shows
« CONFIRM ? »
.
4. Press
Menu/Ok
to confirm or
Mute/Clear/Back
to return to the previous
menu. Your Studio will restart automatically.
7. Emergency default
If you have lost your PIN code, you can still restore your Studio to its default
settings.
1. Remove the batteries from the handset.
2. Press and hold
*/Keylock
while replacing the batteries. The display shows
« DEFAULT »
.
3. Press
Menu/Ok
to confirm. Your Studio will restart automatically.
8. Eco mode
You can reduce the level of power emissions by operating your phone in Eco
mode. When the ECO mode is set to ON, the base transmission power will be
reduced. This feature is set to OFF by default.
