–
10
–
Pre-dialling
1. When the handset is in idle mode, input the desired
number.
2. Press
key to cancel the wrong digit, input the
correct one again. If a pause is needed during dialing,
press and hold
key for a while and character “
P
” will
be shown. A 3 seconds pause will be added while dialing.
3. Press the
or
key, the number will be
automatically dialled out.
4. After finishing the conversation, press
key or place
the cordless handset into the charger.
The talk timer will be shown during talk.
Adjust the Receiver and Speakerphone Volume
While the phone is in talk mode, press + or
-
key on the handset
to adjust the receiver or speaker volume of the handset. The
display will show the current volume level during adjusting.
Answer a Call
When the phone rings, the handset LED will flash and the LCD
on the handset will show “RINGING”. If you have subscribed to
Caller ID service from your local telephone company, the
incoming call information will be shown.
1. Press
the
or
key to answer a call.
2. After finishing the conversation, press
key or place
the cordless handset into the charger cradle.
Auto Answer
1.
If you set on the “AUTO TALK”, just need to pick up the
cordless handset from the charger cradle to answer the
call directly, needn’t press
or
key.
2.
After finishing the conversation, press
key or place
the cordless handset into the charger cradle.
